Fringe Sport Dane 3.0 squat rack and functional trainer with stainless steel front uprights in a home gym studio

Fringe Sport Dane 3.0 Review: A Lot of Rack for $3,000

November 08, 2026•6 min read

The Fringe Sport Dane 3.0 is a squat rack, functional trainer, lat pulldown station and low row station in one frame. The functional trainer trolleys run a 2:1 pulley ratio, while the lat pulldown and low row both run a true 1:1.

At around $3,000, it could be the perfect budget-friendly all-in-one for a lot of home gyms. But after using it in my studio, for my own training and with my personal training clients, there are a few things I don't love about it.

Here's what works, what doesn't, and who I think should actually buy it.

[[BTN:Check~the~Dane~3.0~Price|https://www.fringesport.com/products/dane-3-0-all-in-one-squat-rack-functional-trainer?srsltid=AYCX9vIIMf5bV_yoIVHbXGlNxWZctXLkNNlxJjkkxVQPALmkS_zp42cb#a_aid=liftlab&a_cid=11111111]]

[[NOTE:Disclosure:~Fringe~Sport~sent~me~the~Dane~3.0~at~no~cost~for~this~review,~and~some~links~on~this~page~are~affiliate~links.~I~may~earn~a~commission~at~no~extra~cost~to~you.~That~doesn't~change~what~I~tell~you~about~it.]]

Quick Verdict: Is the Fringe Sport Dane 3.0 Worth It?

[[VERDICT:8.5|A~Lot~of~Rack~for~$3,000|Heavy~220~lb~stacks,~a~built-in~1:1~lat~pulldown~and~low~row,~and~a~rock-solid~frame~make~it~a~great~value.~Cable~friction~at~light~weights~and~the~stock~low~row~setup~keep~it~from~scoring~higher.]]

For about $3,000, the Dane 3.0 gives you a lot: 220 lb weight stacks, 11-gauge 3x3 uprights, a built-in 1:1 lat pulldown and low row, and a rack that doesn't move even when it isn't bolted down.

It's not perfect. The cables have a little friction at lighter weights, the stock low row gets in the way of the trolleys, and the finish isn't the most premium I've used. None of those are dealbreakers, and for most home gym owners this is an awesome rack for the money.

Fringe Sport Dane 3.0 Specs

Specs and prices are from Fringe Sport, checked November 8, 2026.

[[SPECS:Price=$2,999~black,~$3,199~stainless;Weight~Stacks=2~x~220~lb~(440~lb~total);Trolley~Pulley~Ratio=2:1;Lat~Pulldown~and~Low~Row~Ratio=1:1;Cable~Travel=88~in~trolleys,~44~in~pulldown~and~row;Uprights=3x3~in,~11-gauge,~1~in~holes,~2~in~spacing;Rack~Capacity=1,200~lb;Footprint=60.3~in~L~x~47.2~in~W~x~93.5~in~H;Assembled~Weight=798~lb;Warranty=Lifetime~on~rack,~5~years~on~pulley~system]]

[[PROS:220~lb~stacks~with~El~Toro~weight~horns~included;Built-in~1:1~lat~pulldown~and~low~row;Rock~solid~without~bolting~it~down;Needle~spotter~arms~sit~narrow~and~low;Open~3x3,~1~in~hole~ecosystem~for~upgrades;A~lot~of~machine~for~around~$3,000]]

[[CONS:Cables~have~some~friction~at~light~weights;Stock~low~row~blocks~the~lowest~trolley~positions;No~seat,~lat~bar~or~low~row~foot~plate~included;J-cups~and~spotter~arms~mark~up~quickly;Finish~isn't~the~most~premium]]

Price and the Stainless Steel Option

The Dane 3.0 is $2,999 in all black and $3,199 for the stainless steel version, which is the one I have.

The stainless steel is on the front uprights only. The back uprights and all the crossmembers are still black. It's mostly there to protect against scratches and wear from your J-cups, spotter arms and the functional trainer trolleys, and it's also just a look a lot of people prefer, including me.

What's Included (and What Isn't)

At that price, you get the J-cups, the Needle spotter arms, the lat pulldown station and the low row station. You also get the 220 lb weight stacks with El Toro weight horns, a set of mag pins for the spotter arms, and a pair of D-handles. The D-handles are basic rubber handles, nothing special.

What you don't get is a seat or a low row foot plate. Fringe also lists the lat pull bar as a separate purchase. You can buy those from Fringe, or, because this is a standard 3x3 rack with 1-inch holes, you can use almost any other brand's lat pulldown seat built for that format. I've also used the [[LINK:REP~Fitness~Pegasus~seat|https://liftlabreviews.com/post/RepPegasus]] on it, and right now I'm using the Fringe Gatling Seat, which I cover in the lat pulldown section below.

J-Cups and Needle Spotter Arms

I really like the Needle spotter arms. They're narrow, so you can get them really low.

The downside is that both the J-cups and the spotter arms get scratched up pretty easily. It's a squat rack, so it's supposed to get beat up, but these get marked up a little faster than on most other racks I've used.

Overall, the included attachments are okay. Because the Dane uses the 3x3, 1-inch hole standard, you can always upgrade to more premium attachments from other brands down the road, and they'll fit really well.

Weight Stacks, El Toro Horns and Pulley Ratios

Each side has a 220 lb weight stack, and the El Toro weight horns come stock. They work really well. You can add plates to the stacks, and I think you can fit up to a 55 lb bumper plate on each side, which brings each stack to over 300 lb. That's more than most people will need, especially on the functional trainer.

On the Dane 2.0, the El Toro horns were an add-on you bought separately, so having them included is a nice upgrade.

2:1 vs 1:1, Explained

A 1:1 ratio means you feel exactly what's on the stack. Put 100 lb on the stack, and you feel 100 lb on a lat pulldown or low row.

A 2:1 ratio means you feel half. With 100 lb on the stack, you feel 50 lb at the trolley handle.

The 2:1 trolleys are really useful for lighter movements, rehab exercises, and anyone who isn't very strong yet and needs the lower end of the stack. The 1:1 pulldown and row still give you plenty of weight for heavy back work.

[[TRAINER:If~I~have~a~client~doing~cable~flys~with~10~or~20~on~the~stack~and~the~trolleys~ran~1:1,~they~might~not~be~able~to~finish~the~reps~I'm~asking~for.~The~2:1~trolleys~solve~that,~which~matters~a~lot~when~you~train~people~of~different~strength~levels~on~the~same~machine.]]

Lat Pulldown Station

The lat pulldown cable point sits high and out in front of the rack. On older Fringe racks, you had to add the Drew attachment to get the cable that high, so this is another thing you used to buy separately that now comes stock.

I set it up with 130 lb on the stack, which is a full 130 lb at 1:1, and I could get a really big stretch on the lats. I was nowhere near the top of the cable station, so even if you're a little taller, I don't think you'll have any issue getting a full stretch.

It also pulls the cable point further out, so you get more of a true vertical pull from the seat. Overall, I really like the lat pulldown station, and it works just like it should.

The Gatling Seat

The seat I'm using is the Fringe Gatling Seat. It's not included with the Dane 3.0.

It's pretty heavy, so it's not the easiest thing to move around, but I find it really comfortable. I like the adjustments for lat pulldowns, and I really like it for dumbbell seal rows. The seat adjusts up and down, and it also pivots. Pull the pin and lock it, and you can set your back on it for hip thrusts.

Stability: No Bolting Required

The front extension feet come with the rack, and you need them, because the low row cable runs up through them. They also help with stability, which is very good.

During lat pulldowns there was no swaying and no rocking, and my rack isn't bolted down. Fringe says you don't need to bolt it down either. With 440 lb of weight stacks on the back, it's heavy enough that it doesn't move at all.

The Low Row Problem (and How to Fix It)

The low row itself works fine. I don't have a foot plate for it, but it's a 1:1 ratio, so you can really load it up, and with a foot plate it would work really well.

The downside is that the low row is bolted on in a single position on the upright, and other reviewers have pointed this out too. Because it's fixed there, it gets in the way of the functional trainer. If you want to drop a trolley really low, you'll bang into the low row before you get to the bottom.

The good news is that there are a few ways around it:

  • Move the low row to the front foot. Fringe put out a video on this, [[LINK:The~Dane~Low~Row~Solution|https://www.youtube.com/watch?v=nQFo0U1cccE]]. You unbolt the low row trolley and mount it on the front foot extension, in the specific hole they show. It's pretty easy. The only catch is that you have to cut the cable a little more, so be careful when you do that.

  • Add the Gibbon Arms. This is how I run mine. I can drop the Gibbon Arms really low, which mostly eliminates the problem.

  • Use mag pins instead. I've seen someone else take the low row off and lock it down on the side with mag pins, if you don't want to move it permanently.

That's the cool part about a Fringe-style rack. It's totally modular, so when something doesn't work exactly how you need it, there's usually an easy modification.

Cable Smoothness: The Main Downside

The functional trainer is one of the main selling points of the Dane 3.0, since you're essentially getting a two-in-one. This is also where I ran into some issues.

The cable system isn't that smooth, especially at lighter weights. When I go heavier, I don't notice it as much, but it's not the smoothest cable system I've ever used, and I've used quite a few.

[[TRAINER:I~have~clients~testing~equipment~in~my~studio~every~day.~When~I~set~the~stack~at~10~or~20~for~a~cable~chest~fly,~it~feels~like~the~cable~is~dragging~and~catching,~and~I~can~almost~hear~the~friction.~That's~where~it~matters~most,~because~lighter~clients~and~rehab~work~live~at~the~bottom~of~the~stack.]]

It's not unusable, and it's not terrible. It doesn't snap back or anything. There's just a little bit of drag at lighter weights. If I had to rate the cable smoothness, I'd put it at about a 7.5 to 8 out of 10. It's just not elite-level smooth.

My guess is that it comes from all the cable routing Fringe had to do to run the lat pulldown and low row at 1:1 and the trolleys at 2:1. It's not a dealbreaker, but it's the biggest downside of this rack.

Gibbon Arms: Worth Adding?

I added Fringe's Gibbon Arms to my Dane 3.0. They don't come with the rack. Fringe lists them at $499.

I'm not sure they're as necessary on this rack, because you already have a high pulldown station and a low row station built in, so you don't need a really high cable for a big stretch. But I really like them for wide cable chest flys, and they add more versatility to your training.

They have a lot of adjustability. They rotate almost 180 degrees, go all the way out and all the way back, drop down low and go up pretty high. On one side the pin hits, so you can't go fully in that direction. I also wish the slots were numbered, because I'm always counting holes on one side and then trying to match it on the other.

Overall, they're a fun add-on and they help with the low row problem, but they're optional if you've got extra cash, not a must-have.

How the Dane 3.0 Compares

Dane 3.0 vs. Dane 2.0 (spec sheet only)

I haven't tested the Dane 2.0, so this comparison is from Fringe's spec sheets, not hands-on use.

The Dane 2.0 is $2,799 with dual 160 lb stacks running 1:1 everywhere, and its lat pulldown and low row stations aren't built in. The Dane 3.0 bumps the stacks to 220 lb, runs the trolleys at 2:1 for smaller jumps on lighter movements, builds in a true 1:1 lat pulldown and low row, and includes the El Toro horns and the high pulldown point that used to be add-ons.

The trade-off is trolley weight. Fringe says a full 220 lb stack feels like about 110 lb per handle on the 3.0 trolleys, compared with up to 160 lb on the 2.0. For most people, 110 lb per handle is plenty, and the El Toro horns let you add plates when you need more.

Price vs. other all-in-one racks (spec sheet only)

At list price, the Dane 3.0 is one of the more affordable rack and functional trainer combos with dual weight stacks. As of early November 2026, the Force USA Functional Trainer Rack was $3,399 with 200 lb stacks and no dedicated pulldown or row station, Fringe's own Great Dane was $3,499 with a built-in Smith machine, and REP's Ares 2.0 attachment alone was $2,999.99 before you buy the PR-5000 rack it mounts to. Prices change often, so check current pricing before you buy.

If you don't need cables at all and just want a simpler rack, I've also reviewed the [[LINK:FED~Fitness~SR2~Squat~Rack|https://liftlabreviews.com/post/fed-fitness-sr2-squat-rack-review]].

Who Should Buy the Dane 3.0 (and Who Should Skip It)

[[WHO:Home~gym~owners~who~want~a~rack,~cables,~lat~pulldown~and~low~row~in~one~frame;Lifters~who~want~heavy~1:1~back~work~without~a~separate~lat~machine;Anyone~who~wants~room~to~grow~with~3x3,~1~in~hole~attachments;Buyers~with~a~budget~around~$3,000]]

[[SKIP:Lifters~who~mostly~do~light,~precise~cable~isolation~and~want~the~smoothest~cables~possible;Anyone~who~wants~a~seat~and~low~row~foot~plate~in~the~box;Rooms~with~ceilings~under~8~feet;Buyers~who~want~a~premium,~scratch-resistant~finish]]

Final Verdict

At around $3,000, I think the Dane 3.0 is an awesome rack for a lot of people. It's not perfect. The cables have a little friction at lighter weights, the stock low row setup is a bit awkward, and it's not the most premium finish out there.

But for the money, you get a lot: 220 lb stacks, 11-gauge 3x3 uprights that fit attachments from pretty much every other brand, a built-in 1:1 lat pulldown and low row, and Fringe add-ons like the Gibbon Arms and Gatling Seat if you want to build it out.

It's also a really nice-looking rack. I like the upper banner, the matte black finish and the upper crossmembers. I particularly like the stainless steel version, which costs a couple hundred dollars more and gives you some longer-lasting durability on the uprights.

[[BTN:Check~the~Dane~3.0~Price|https://www.fringesport.com/products/dane-3-0-all-in-one-squat-rack-functional-trainer?srsltid=AYCX9vIIMf5bV_yoIVHbXGlNxWZctXLkNNlxJjkkxVQPALmkS_zp42cb#a_aid=liftlab&a_cid=11111111]]

[[NOTE:Disclosure:~Fringe~Sport~sent~me~the~Dane~3.0~at~no~cost~for~this~review,~and~some~links~on~this~page~are~affiliate~links.~I~may~earn~a~commission~at~no~extra~cost~to~you.]]

FAQ

How much does the Fringe Sport Dane 3.0 cost?

The Dane 3.0 is $2,999 in black and $3,199 with stainless steel front uprights (checked November 8, 2026). Budget extra for a lat pulldown seat, lat bar and low row foot plate, since none of them are included.

Does the Dane 3.0 come with a lat pulldown seat?

No. It doesn't include a seat, a lat bar or a low row foot plate. Because it's a standard 3x3 rack with 1-inch holes, most other brands' lat pulldown seats will fit. I use the Fringe Gatling Seat, and the REP Pegasus seat works on it too.

What pulley ratio does the Dane 3.0 use?

The functional trainer trolleys run 2:1, so you feel half the stack weight. The lat pulldown and low row run a true 1:1, so you feel exactly what's on the stack.

How heavy are the Dane 3.0 weight stacks?

Each stack is 220 lb, for 440 lb total. The included El Toro weight horns let you add plates, and with up to a 55 lb bumper on each side, each stack goes over 300 lb.

Do you need to bolt the Dane 3.0 to the floor?

No. Fringe says it doesn't need to be bolted down, and mine isn't. With 440 lb of stacks in the back, it didn't sway or rock at all during heavy lat pulldowns.

Does the low row get in the way of the trolleys?

Yes, in the stock setup the low row blocks the lowest trolley positions. You can move it to the front foot extension using Fringe's video, use the Gibbon Arms like I do, or take it off and lock it to the side with mag pins.

Are the Dane 3.0 cables smooth?

Mostly. At heavier weights they feel fine, but at lighter weights there's a little drag and friction. I'd rate the cable smoothness about a 7.5 to 8 out of 10.

Is the stainless steel Dane 3.0 worth it?

If you want the look and some extra protection on the front uprights where J-cups, spotter arms and trolleys rub, I think it's worth the extra $200. The rear uprights and crossmembers are still black.

Will other brands' attachments fit the Dane 3.0?

Yes. It uses 3x3 uprights with 1-inch holes, so most attachments built for that standard fit well.

More Reviews

[[ALT:REP~Fitness~Pegasus~Seat|The~lat~pulldown~and~seal~row~seat~I've~also~used~on~the~Dane~3.0.|https://liftlabreviews.com/post/RepPegasus]]

[[ALT:FED~Fitness~SR2~Squat~Rack|A~3x3~rack~with~1-inch~holes~and~a~long~list~of~included~attachments,~if~you~don't~need~cables.|https://liftlabreviews.com/post/fed-fitness-sr2-squat-rack-review]]

[[ALT:Apex~Adjustable~Bench|17~back~pad~positions~and~a~growing~attachment~system~to~pair~with~your~rack.|https://liftlabreviews.com/post/apex-fitness-apex-bench-review]]

[[ALT:REP~Fitness~AB-3000~2.0|One~of~my~favorite~value~adjustable~benches~after~years~of~use~with~clients.|https://liftlabreviews.com/post/repab3000fidbench]]

[[ALT:GET~RX'd~FIDAB-2|A~very~stable,~fast-adjusting~premium~bench~for~inside~your~rack.|https://liftlabreviews.com/post/FIDAB-2]]

Nick Bardsley

Nick Bardsley

Nick Bardsley is a personal trainer in Charleston, SC, who has been coaching clients for 13 years. Every piece of equipment on LiftLab Reviews gets weeks of real training, in his own workouts and with his clients, before he writes a word about it. That way the reviews reflect how gear actually holds up in daily use.

Back to Blog