RitFit Gazelle Pro leg press and hack squat machine in a garage gym

RitFit Gazelle Pro Review: Great Leg Press, Limited Hack Squat

October 18, 2026

The RitFit Gazelle Pro is a plate-loaded leg press, hack squat, and calf raise combo that does a lot of things right. The carriage is incredibly smooth, it can hold a ton of weight, and it has some space-saving features I really like. It also has a few design decisions I'm not happy about, and one of them is a big deal depending on how you train.

I've been training on the Gazelle Pro for the last few weeks, both on my own and with my personal training clients. That matters, because putting people of different heights and strength levels on a machine exposes things you would never notice training alone.

The key buying question here is simple: do you want a great leg press, or do you need a great hack squat? On this machine, those two answers are very different.

[[BTN:Check~Gazelle~Pro~Price|https://REPLACE-WITH-RITFIT-AFFILIATE-LINK]]

[[NOTE:Disclosure:~Some~links~in~this~review~are~affiliate~links.~If~you~buy~through~them,~I~may~earn~a~commission~at~no~extra~cost~to~you.~It~never~changes~what~I~say~about~the~equipment.]]

Quick Verdict: Is the RitFit Gazelle Pro Worth It?

[[VERDICT:7.5|Great~Leg~Press,~Limited~Hack~Squat|A~smooth,~quiet,~high-capacity~leg~press~with~excellent~calf~raises,~held~back~by~a~hack~squat~that~bottoms~out~around~90~degrees.]]

If your priority is a smooth, quiet, high-capacity leg press with excellent calf raises, yes. The leg press range of motion is outstanding and the carriage feels better than I expected at this price.

If you want deep hack squats or reverse hack squats, probably not. At 5 foot 8 and a half, I bottom out the hack squat at about 90 degrees, and the reverse hack squat is even more limited. Every one of my clients bottoms it out too.

My Ratings

[[RATING:Leg~Press~Range~of~Motion=10;Calf~Raise=10;Hack~Squat~Range~of~Motion=4.5]]

RitFit Gazelle Pro Specs

[[SPECS:Price=$1,399.99~list~at~time~of~writing;Functions=Leg~press,~hack~squat,~reverse~hack~squat,~calf~raise;Static~Capacity=2,000~lb;Dynamic~Capacity=1,300~lb;Frame=2x3~in~steel,~approx.~11~gauge;Assembled~Weight=334.3~lb;Dimensions=86.4~x~48.2~x~57.8~in;Leg~Press~Angles=3;Hack~Squat~Angles=4;Plate~Hole~Diameter=2~in;Listed~User~Height=4~ft~9~in~to~6~ft~8~in;Weight~Horns=Removable~upper~and~lower,~about~11.5~in~each~(my~measurement);Plate~Storage=4~removable~storage~horns;Warranty=3~yr~frame~and~welds,~1~yr~bearings,~6~mo~parts~and~pads]]

Specs come from RitFit's published product listing, except the weight horn length, which I measured myself.

RitFit Gazelle Pro Pros and Cons

[[PROS:Extremely~smooth,~quiet~roller~carriage;Outstanding~leg~press~range~of~motion;Calf~raises~off~the~footplate~with~a~deep~stretch;Carriage~stays~smooth~even~when~loaded~on~one~side;Tool-free~removable~weight~horns~and~plate~storage;Upper~horns~roughly~double~your~loading~space;Band~pegs~on~top~and~underneath;Heavy~frame~with~very~little~flex;Rear~wheels~make~repositioning~possible]]

[[CONS:Hack~squat~bottoms~out~around~90~degrees;Reverse~hack~squat~depth~is~even~more~limited;Back~pad~only~anchors~at~the~top~and~can~slide~when~getting~in;Leg~press~handles~double~as~the~safety~handles;Footplate~angle~pin~is~hard~to~reach~with~plates~loaded;Large~footprint~at~roughly~87~x~48~in]]

Build Quality and Carriage Feel

This is RitFit's more premium leg machine, and it feels like it. I'd describe it as roughly a 300 lb machine in hand, and RitFit lists the assembled weight at 334.3 lb. Either way, it's substantial. It doesn't have a ton of flex or give like some of the other budget-friendly leg press and hack squat combos I've used.

The carriage is the standout. It rides on rollers along long steel rods, and there is very little friction and almost no noise during any movement. That's one of the most important things to look for in a machine like this. If the carriage isn't smooth, nothing else really matters. For a piece of equipment in this price range, the Gazelle Pro gets that part right.

Leg Press: The Best Part of the Gazelle Pro

The leg press is probably my favorite movement on this machine, and it's where the Gazelle Pro earns its price.

Setting Up Leg Press Mode

To get into leg press mode, you drop a pop pin on the back of the hack squat footplate so it lays back. Underneath, a second pop pin lets you angle the footplate through three positions, tilting it further toward the floor depending on how you like your setup.

That underneath pin is a small nuisance. You have to reach under the machine to find it, and with plates loaded it can be hard to locate. It's not a deal breaker, just something you'll notice.

The back pad then drops onto the top of the hack squat footplate and locks in with a single loose pop pin through one hole at the top.

Range of Motion

This is the most important part, and the range of motion on the leg press is awesome. There's a safety stopper in the middle of the carriage with four settings. I keep it as low as it goes, but even on the highest setting you would still struggle to bottom the machine out. To get anywhere near the bottom, my hips start coming up off the pad.

For leg press range of motion, I give it a 10 out of 10.

The footplate is moderately wide. It could be a little wider if you like a true sumo stance, but neither I nor any of my clients have found it to be a problem.

The Back Pad and Handle Issues

Two things on the leg press side bother me.

First, the back pad. Because it only attaches at the top, it tends to slide around. I've had clients put a hand on it while getting into the machine and the pad shifts sideways with them. You could really eat dirt doing that. I wish RitFit had come up with a more stable way to attach it.

[[NOTE:Trainer~Perspective:~This~is~a~problem~I~notice~much~more~because~I'm~putting~clients~on~the~machine,~not~just~myself.~Someone~climbing~in~naturally~reaches~for~the~pad~to~steady~themselves,~and~that's~exactly~when~it~slides.~If~more~than~one~person~will~be~using~your~machine,~keep~that~in~mind.]]

The hand hook for getting into the machine is a nice touch, though.

Second, the handles. The rubber handles on the sides of the carriage are also your safety handles. You rotate them to release and engage the safeties. The problem is that if you pull, push, or twist those handles while grinding through a hard set, you can accidentally rotate the safeties in. They then hit the uprights and interrupt your rep.

Outside of that, the back pad is comfortable and the pads are soft.

Calf Raises

Calf raises happen right off the bottom edge of the leg press footplate, and they work really well. Nothing gets in the way of your heels, so you can drop into a really deep stretch at the bottom.

For a leg press calf raise setup, that's another 10 out of 10 from me. Plenty of combo machines treat the calf raise as an afterthought. This one doesn't.

Hack Squat: Where the Gazelle Pro Falls Short

This is where the review turns.

Switching to Hack Squat Mode

Switching over is basically the leg press setup in reverse. Pull the pop pin and lay the leg press footplate flat, pull the back pad off, then slide it up and over into the slot at the top of the hack squat carriage and drop the pin in.

The same back pad issue shows up here. Because you get into a hack squat sideways, the pad can slide a little as you climb in. And if you switch from leg press to hack squat without resetting the safety stopper, you may find the carriage sitting a little high. I had to get up on my tiptoes to get back into position.

Once you're in, the setup is comfortable. You get shoulder pads for both the hack squat and the reverse hack squat.

Hack Squat Range of Motion

I pulled the safety pin out entirely to test the full range of motion. I want my hamstrings to touch my calves at the bottom of a hack squat, and that's just not possible on this machine. At about 90 degrees of knee bend, I bottom the carriage out.

I'm 5 foot 8 and a half. If you're shorter, this is going to be even more of an issue.

To make it work at all, I have to put my feet really high on the footplate. Moving my feet way down the platform might buy a little more depth, but that position kills my knees and doesn't feel comfortable at all.

I wish RitFit had made this adjustable, whether that's letting the carriage travel lower or moving the shoulder pads down a bit. As it stands, you just can't get a full range of motion.

Reverse Hack Squat

The reverse hack squat is even worse. With the safety removed, I get nowhere near depth.

Compared with the leg press, I'd put the hack squat and reverse hack squat at a 4 or 5 out of 10 for range of motion and usability. Every single one of my clients bottoms it out.

[[NOTE:Trainer~Perspective:~Testing~with~clients~of~different~heights~is~what~made~this~clear.~It's~not~a~me~problem.~Every~client~I've~put~in~the~hack~squat~has~bottomed~it~out,~and~shorter~lifters~hit~the~bottom~even~sooner.~If~a~deep~hack~squat~is~a~big~part~of~your~leg~training,~plan~around~that.]]

Footplate Positions

The footplate has two positions. You can run it in a more vertical position, or pull the swivel arm out and drop it flat. I keep it in the lower position for both the hack squat and the leg press because that has worked best for me and my clients.

Loading Capacity and Space-Saving Features

This is the other area where the Gazelle Pro really impressed me.

All of the weight horns and plate storage are removable, with no tools required. Right now I run it with just the lower weight horns, which are around 11.5 inches long, and that holds a decent amount of plates. If you're very strong, the upper weight horns pop on in seconds. They're also about 11.5 inches, so with both on each side you basically double your loading capacity. RitFit rates the frame at 2,000 lb static and 1,300 lb dynamic.

I've also loaded a bunch of plates on just one side, and it doesn't seem to affect the machine at all. The carriage doesn't make any noise or feel any different than when I load both sides evenly. I don't know whether RitFit wants you doing that, but in my testing it hasn't been an issue.

There are four plate storage horns on the back, two per side, that slide on and off as well. I'm really glad RitFit didn't bolt these on. If you want to push the machine closer to a wall, just pull the horns off and save some space.

You also get band pegs on the top and underneath the machine, so you can run bands from the frame to the carriage and add resistance without needing more plates.

Footprint and Moving It

The footprint is around 87 inches long and about 48 inches wide. RitFit lists it at 86.4 x 48.2 x 57.8 inches. The removable horns help trim that down, but this is not a small machine.

It's heavy and solid, so you're not going to be moving it around willy-nilly. That said, there are wheels on the back. I tried tipping it up on camera and it was easier than I expected, so you can roll it a bit if you need to reposition it.

How the Gazelle Pro Compares to Other Leg Press Hack Squat Combos I've Tested

I've trained on a few other leg press and hack squat combos in my studio, and the comparisons make the Gazelle Pro's strengths and weaknesses pretty clear.

RitFit Gazelle Pro vs Lionscool Leg Press / Hack Squat

The Lionscool Leg Press / Hack Squat is almost the mirror image of the Gazelle Pro. At around $800 it costs a lot less, it's more compact, and it has noticeably more flex. But its hack squat is excellent. I can get my calves basically touching my hamstrings on it, and it feels great on my knees. It also lets you disconnect the two sides for true single-leg presses.

The Gazelle Pro is the heavier-duty, smoother, higher-capacity machine with the better leg press and the far better calf raise. The Lionscool is the better hack squat. If hack squats are your priority, the cheaper machine is honestly the better pick.

RitFit Gazelle Pro vs Legion Leg Press Hack Squat

The Legion Leg Press Hack Squat is a completely different design: a horizontal, cable-driven machine with a 1:1 load ratio. It's very low-back friendly and switches modes with one pin. It also lands at about 90 degrees on the hack squat for me, so neither machine solves the depth problem. The Legion sells around $2,200 on sale, so it's a bigger investment, and it suits lifters who care most about back comfort and fast transitions.

Who Should Buy the RitFit Gazelle Pro?

  • Home gym owners who want a really solid leg press and calf raise above everything else

  • Lifters who don't want to step up to commercial-grade pricing

  • Strong leg pressers who need serious loading capacity

  • People who want removable horns and storage to manage space

  • Anyone who is happy with hack squats to roughly 90 degrees

Who Should Skip It?

  • Lifters who want full-depth hack squats or reverse hack squats

  • Shorter users who will bottom out the hack squat even sooner

  • Anyone with a tight floor plan, since it's roughly 87 x 48 inches

  • People who want the most foolproof back pad and handle design

Final Verdict: Is the RitFit Gazelle Pro Right for Your Home Gym?

The RitFit Gazelle Pro sits in that upper-budget tier, landing somewhere around $1,400 with the sales and discount codes RitFit usually has running. For that money, you get a phenomenal leg press, a genuinely great calf raise, an incredibly smooth and quiet carriage, and smart, tool-free space-saving features.

The hack squat and reverse hack squat are severely limited in range of motion. The pads are soft and comfortable, but the back pad's tendency to slide and the safety handles doubling as leg press handles are real downsides.

If you mainly want a great leg press, don't care much about hack squats, and want a good place to train calves, I think the Gazelle Pro is a really good option. If full range of motion on the hack squat and reverse hack squat matters to you, this probably isn't your machine.

And some people genuinely don't care. If 90 degrees is all you need on a hack squat, you'd be perfectly happy here. It comes down to which movements matter most to you.

[[BTN:Check~Gazelle~Pro~Price|https://REPLACE-WITH-RITFIT-AFFILIATE-LINK]]

[[NOTE:Disclosure:~Some~links~in~this~review~are~affiliate~links.~If~you~buy~through~them,~I~may~earn~a~commission~at~no~extra~cost~to~you.]]

RitFit Gazelle Pro FAQ

Is the RitFit Gazelle Pro a good leg press?

Yes. The leg press is the best part of the machine. The carriage is extremely smooth and quiet, and the range of motion is so generous that even with the safety stopper on its highest setting, it's hard to bottom out.

How deep can you go on the Gazelle Pro hack squat?

Not very deep. At 5 foot 8 and a half, I bottom out at about 90 degrees of knee bend with the safety pin removed. The reverse hack squat is even more limited. Shorter lifters will bottom out sooner.

Is the Gazelle Pro good for shorter lifters?

For the leg press and calf raise, yes. For the hack squat, shorter lifters will hit the bottom of the carriage even earlier than I do, so expect less than 90 degrees of depth.

How much weight can the RitFit Gazelle Pro hold?

RitFit rates it at 2,000 lb static and 1,300 lb dynamic. Practically, the lower weight horns are about 11.5 inches long, and adding the removable upper horns roughly doubles your loading space.

Can you do calf raises on the Gazelle Pro?

Yes, and they're excellent. You do them off the bottom edge of the leg press footplate, and nothing blocks your heels, so you get a deep stretch.

How much space does the RitFit Gazelle Pro take up?

Plan for roughly 87 inches long by 48 inches wide. RitFit lists it at 86.4 x 48.2 x 57.8 inches. Removing the weight horns and storage horns helps when you push it toward a wall.

Can you move the RitFit Gazelle Pro?

A little. It's heavy, but there are wheels on the back, and tipping it up onto them was easier than I expected.

How much does the RitFit Gazelle Pro cost?

RitFit listed it at $1,399.99 at the time of writing. With the sales and discount codes RitFit usually runs, expect to land somewhere around $1,400.

Is the Gazelle Pro or the Lionscool better?

The Gazelle Pro has the smoother, heavier-duty build, the better leg press, and the better calf raise. The Lionscool costs about $800 and has a much deeper hack squat. Pick based on which movement matters more to you.

More Leg Machine Reviews

If you're building out your lower-body setup, these are the other leg machines I've tested in my studio.

[[ALT:Lionscool~Leg~Press~/~Hack~Squat|A~compact,~budget-friendly~combo~around~$800~with~a~much~deeper~hack~squat~and~true~single-leg~pressing.|https://liftlabreviews.com/post/lionscool-leg-press-hack-squat-review]] [[ALT:Legion~Leg~Press~Hack~Squat|A~horizontal,~cable-driven~design~with~a~1:1~load~ratio~that's~very~friendly~on~the~low~back.|https://liftlabreviews.com/post/legionlegpresshacksquat]] [[ALT:Force~USA~Solitude~Leg~Extension~/~Curl|A~premium~selectorized~leg~extension~and~curl~with~a~heavy~220~lb~stack.|https://liftlabreviews.com/post/force-usa-solitude-leg-extension-leg-curl-review]] [[ALT:Temple~of~Gainz~Leg~Extension~&~Curl|A~space-saving~combo~for~dedicated~quad~and~hamstring~isolation.|https://liftlabreviews.com/post/toglegextensionlegcurl]] [[ALT:Mikolo~NOVA~Leg~Extension~/~Curl|A~budget-friendly~way~to~add~quad~and~hamstring~isolation~to~your~leg~setup.|https://liftlabreviews.com/post/mikolonova]] [[ALT:HVO~Plate-Loaded~Hip~Thrust|A~compact~plate-loaded~option~if~glute~training~is~a~priority.|https://liftlabreviews.com/post/HVOhipthrustmachine]]

Nick Bardsley

Nick Bardsley

Nick Bardsley is a personal trainer in Charleston, SC, who has been coaching clients for 13 years. Every piece of equipment on LiftLab Reviews gets weeks of real training, in his own workouts and with his clients, before he writes a word about it. That way the reviews reflect how gear actually holds up in daily use.

Back to Blog